Home / Multi-head split systems

Heating and cooling, Melbourne

Multi-head split system installation in Melbourne

Several rooms heated and cooled from one outdoor unit, each with its own control and no ductwork.

  • VEU accredited provider
  • Licensed and insured
  • Clear, written quotes
Mitsubishi Electric multi split system: one outdoor unit running three wall units
VEU accredited provider

Discount applied on your quote, paperwork handled

30+ years combined experience

Expert installation by licensed, insured installers

Clear, written quotes

Fixed price, itemised, no pressure to decide on the day

Here when you need us

Workmanship warranty and servicing by the installing team

The system

What is a
multi-head split system?

A multi-head split connects two to five indoor units to a single outdoor unit.

  • Each room has its own controller, so a bedroom can be cool at night while the living room is off.
  • With no ducts in the roof, nothing is lost to the roof space.

It is a good fit for double-storey homes, townhouses, units and homes without usable roof space, and for replacing several gas space heaters at once.

Installed prices depend on the number of rooms and pipe run lengths; your written quote lists each room.

Multi-room system
Runs on electricity
Heating and cooling
Bedroom with a quiet wall-mounted split system unit
Packages

Packages, fully installed

Every package lists exactly what is included. Your price is confirmed in writing after the home assessment.

Mitsubishi Electric multi split system: one outdoor unit running three wall units
No roof space, or key rooms

Three-room multi-head

One outdoor unit, three wall units

  • Wall units sized to each room
  • Each room on its own controller
  • Pipe runs in covered ducting
  • Condensate drains to a proper outlet
  • Gas wall or space heater removed
  • Workmanship warranty plus manufacturer warranty
Fully installed from$7,490*Additional rooms quoted per room

*Fully installed prices after the Victorian Energy Upgrades discount, where eligible. Based on a standard installation. Longer duct, pipe or cable runs, or switchboard upgrades, may add to your quote.

Your price is confirmed in writing after the home assessment. Brand options: Mitsubishi Electric, Daikin, Samsung, Fujitsu and Panasonic.

How it works

How does a
multi-head split work?

The outdoor unit circulates refrigerant to each indoor unit through insulated pipe runs.

Each indoor unit heats or cools its room independently, and the outdoor unit adjusts its output to match the rooms that are running.

The design work is in the placement: where each indoor unit sits for airflow and appearance, and how the pipes travel between rooms.

The assessment

What we check at your home

  • Which rooms need heating and cooling, and how they are used
  • Indoor unit type and position in each room
  • Pipe run routes, lengths and how they are concealed
  • Outdoor unit position and noise to neighbours
  • Total capacity so every room performs on the hottest day
  • Switchboard capacity and the circuit required
  • Any gas wall or space heaters to remove
Capacity

Sizing guide

A starting point only. We size your system from measured rooms, insulation and window orientation.

2 roomsBedroom and living

A common starting point for units and smaller homes.

3 roomsLiving plus two bedrooms

Our most popular multi-head configuration.

4 to 5 roomsMost of the home

Close to whole-home comfort without ducting.

Running costs

Running costs
and how to lower them

A correctly sized inverter system adjusts its speed instead of switching on and off, which keeps running costs down. The rest comes down to how it is used.

  • Cool to 24 to 26 degrees and heat to 18 to 21 degrees; each degree further adds roughly 10 percent
  • Use zones or close doors so you only condition the rooms you use
  • Close curtains and blinds on hot afternoons
  • Keep filters clean and service once a year
  • Improve ceiling insulation where you can

At the assessment we estimate running costs for your home so you can compare options properly.

Our process

How we work

01

We listen first

Which rooms are uncomfortable, how the house is used, what is installed now and when you need a decision.

02

We measure your home

Room sizes, insulation, roof space, existing ductwork, switchboard capacity and the best outdoor unit position.

03

We explain your options

Usually two or three, with what each costs to run and which one we would choose for your home.

04

You get a clear, written quote

Equipment, inclusions, exclusions, any discount and your final price. No pressure to decide on the day.

05

Installed carefully, cleaned up after

You know who is coming and when. Handover ends with the controller in your hand and the paperwork in your inbox.

Questions

Frequently asked questions
about multi-head split systems

How many rooms can one outdoor unit run?

Usually two to five indoor units. We check the total capacity against the outdoor unit so every room still performs on a 40 degree day.

Multi-head or several single splits?

Several single splits need several outdoor units. A multi-head keeps one outdoor unit, but every room depends on it. We weigh both for your house and the quote explains the choice.

Can indoor units be hidden?

Bulkhead units sit inside a ceiling bulkhead with only a grille visible. They need the ceiling space and cost more to install, so we recommend them where appearance matters.

Is a multi-head split eligible for the Victorian Energy Upgrades discount?

It can be, when it replaces an eligible gas heater. We confirm eligibility at the assessment and apply it on your quote.

Your next step

Get a clear, written quote for the right system.

A licensed installer visits, measures your home and explains your options. No pressure to decide on the day.

Other options

Compare other systems

Daikin Premium Inverter ducted system, indoor and outdoor unit

Ducted reverse cycle

Whole-home heating and cooling with zones.

Mitsubishi Electric MSZ-AP split system wall unit

Single split systems

Efficient heating and cooling for one room.

Aircore installers removing an old gas ducted heater and bringing in a new ducted reverse cycle system

Gas ducted replacement

Move off gas and add cooling.

Brands we install

We install trusted household names and recommend the model that suits your home, not the one with the biggest margin.

Two Aircore technicians checking an outdoor unit beside a brick home
After installation

Installation, servicing
and repairs

The team that installs your system services it. The first service is included, and after that we send a reminder each year so small faults are found before the first heatwave, not during it.

  • Filter and coil clean
  • Refrigerant pressures and electrical checks
  • Drain flush and airflow check, recorded in your file
Where we work

Installation locations
across Melbourne

Our assessment and installation teams cover metropolitan Melbourne, bayside and the Mornington Peninsula.

Inner Melbourne
Eastern suburbs
South-eastern suburbs
Northern suburbs
North-eastern suburbs
Western suburbs
North-western suburbs
Bayside and Mornington Peninsula
Our promise

What you can hold us to

The same commitments apply to every Aircore job, from a single split system to a whole-home ducted installation.

01

Assessment before any quote

A licensed installer visits, measures each room and checks your roof space and switchboard before recommending anything.

02

One fixed price, in writing

Your quote lists equipment, inclusions, exclusions and any discount. Changes are only made with your written approval.

03

Care in your home

Drop sheets down, shoe covers on, and every offcut and old part taken away when we finish.

04

The same team afterwards

Servicing and warranty work is done by the people who installed your system.

Why homeowners choose us

Why choose Aircore

Clear advice, careful installation and support that does not disappear once the job is done.

VEU accredited provider

Discount applied on the quote

Licensed and insured

ARCtick and REC licensed

Assessment before every quote

Measured in your home

Clear, written quotes

Fixed price, itemised

Workmanship warranty

On every installation

First service included

Same team comes back

30+ years combined experience

Expert installers, cleaned up after

Melbourne-wide

Metro, bayside and the peninsula

Your next step

Stay comfortable all year round.

Get a clear, written quote for the right system.